
Materials:
- Foam seat cushion (16″ x 16″ X 1″)
- 1/2 yard brown felt
- 3 yards white cording
- Foam board (or cardboard)
- Spray adhesive
- Hot glue
- Assortment of felt and fabric paint for accessories
Instructions:
- Using the template, cut 6 house-shaped pieces out of the foam seat cushion.
- Stack and hot glue the 6 pieces together.
- Spread out the brown felt and set the foam house on top. Be sure there is approximately 9 inches of felt around each side of the house. Glue the bottom of the house to the felt.
- Remove the felt that would overlap by cutting from the felt’s edge to the corner of the house (parallel to the house wall). You will make a total of 8 cuts, leaving the felt in a “t” shape.

- Glue each piece of felt to the side of the house. It’s okay if it partially overlaps on to the roof of the house.
- Cut (2) 7.75″ X 4.75″ pieces from the foam board (or cardboard).
- Cover foam board with a piece of brown felt, using the spray adhesive. Wrap corners behind the board and fasten with glue.
- Glue roof pieces to the top of the house.
- Using hot glue, place white cording to hide the seams.
- Make candy accessories and decorate!
For more gingerbread activities, be sure to check out the other posts in our gingerbread category archives.
1 response so far ↓
Dane // Dec 1, 2007 at 8:42 pm
Wow, it’s a 3-D felt board!
Leave a Comment